chinen valve

chinen valve

Wednesday, 10 May 2017 00:00

Toggle Valves

The NT Series standard toggle valve is a compact design for normally closed and quick on/off service. Moving the handle 90 degrees upwards opens the valve
to full flow and stops it firmly in the open position. Shifting the handle position downwards shuts off the valve by spring return. The PTFE soft seat at the tip of
the stem provides a positive repetitive seal.
  • Compact rugged design
  • Stainless Steel and Brass Construction
  • Panel mountable
  • Quick On/Off service
  • Straight and angle patterns available
  • Sizes: 1/8″ & 1/4″
  • LET-LOK, male and female NPT ends
  • MAWP 300 psig at 20°C (70°F)
  • Temperature rating: -20°F to 200°F (-28°C to 93°C)
  • Flow coefficient (Cv) 0.11 to 0.2
  • Colored Nylon Handles
Wednesday, 10 May 2017 00:00

Bonnet Needle Valves

The NU Series offers a general-service valve of rugged design and construction. It is available in stainless steel to suit a wide range of services.
Capable of withstanding high pressures (10,000 psig max) and high temperatures. This valve is typically used in a severe environments, high pressure sampling systems, high pressure shut-down systems and test stands.
  • Blowout-Proof Stem
  • MAWP* up to 10,000 psi (690 bar)
  • MAWT* up to 648°C (1200°F)
  • End connection size range: 1/4″ to 1″ or 6mm to 25mm
  • Flow Coefficient (Cv) 0 to1.5
  • Variety of stem types
  • Packing bolt for easy panel mounting, no packing disassembling is required
Tuesday, 09 May 2017 00:00

High Performance Ball Valves

The BV Series is a high-performance instrumentation ball valve for general service and instrumentation panels. The valves offer a tight shutoff*, long-life service and a low operating torque. The BV Series is rated to max. 6000psig and performs on/off or as a diverter service.
*3-Way is designed for diverting only and not for shutoff service. Inlet is from the bottom only. 3-Way H-6800 is designed to be fully opened to any of the side ports.
  • Certified for ISO 15848-1:2006(E)
  • On/off-service ball valve with 2-way pattern
  • Diverter-service ball valve with 3-way pattern
  • Stainless Steel and Brass construction
  • MAWP* 6000 psi (413 bar)
  • MAWT* 500ºF (260ºC)
  • Variable end connection types and sizes from 1/16” to 3/4” (3mm to 18mm)
  • Operation with colored Nylon handles, metal handle, color
  • anodized aluminum ISLT** (locking device) handles and
  • pneumatically actuated
Page 1 of 4
You are here: Home Products Ball Segment Valve chinen valve

About us

Company Introduction

Payment Method

  western union1
  telegraphic transfer1 
  paypal1

Contact us

Addes:  NO.317 Yinqiao Road, East Industrial Area, Shaoxin, Zhejiang Province, China

TEL: +86 571 87641908
Email: jason@chinenvalve.com
skype: Chinentech
MSN: Chinentech@hotmail.com